collapse

M4OPS

For our prototype mapping system try the Demo at mapping4ops.org/M4OPS.

You can also see an overview of M4OPS on YouTube.

* Forum Staff

PeterC admin PeterC
Administrator
admin webmasterOPS
Administrator

Author Topic: To create a Modifiable Feature Layer (MFL)  (Read 100 times)

PeterC

  • Administrator
  • Member
  • *****
  • Posts: 479
  • Passionate about my one-place study
    • View Profile
    • Holywell-cum-Needingworth History
To create a Modifiable Feature Layer (MFL)
« on: 27 June 2018, 10:57:42 »
To create a Modifiable Feature Layer (MFL) go to your OPS in M4OPS and then:
  • under Advanced Options click on the MFL tab
  • click on New - this will create a new blank Modifiable Feature Layer (MFL), and open some more buttons
  • click in the MFL name box and enter a name by which this Modifiable Feature Layer (MFL) will be known
  • in most cases leave the Fields dropdown as "Minimal Fields" (explained later)
  • now for each feature you want to create:
    • depending on the feature you want to create, click on the Point, Line or Polygon button (the only difference between a Line and Polygon is that the first and last points of a Polygon are joined up
    • (note you can change everything later, so it is much better to start with just an approximate Point, or a simple Line or Polygon, in approximately the right area)
    • on the map, click where you want your first point
    • for a Line or Polygon, you now need to:
      • click on further places on the map to create vertices (points on the Line or Polygon which are automatically joined up)
      • double click to create the last vertex and indicate you have finished
    • having finished the "geometry" of the feature, you will be shown a little form where you can enter its "short text" and "description" (these are  the Minimal Fields mentioned above) - use this to name and describe the feature
    • click on Save to save these fields, then Close to close the little form
  • click where you want your next feature etc, again enter its  "short text", Save and Close the little form
  • repeat as often as you want (but bearing in mind that this is a prototype, do not spend too long entering large amounts of data as it might all disappear)
  • at any point click on the main Save button to save this Modifiable Feature Layer (MFL) in M4OPS (you can do this as many times as you want)
  • later, if you wish to move the positions of any of the points (or vertices on a Line or Polygon) then click on Move, and then click and drag the points to exactly where you want them
  • if you click and drag any point on a Line or Polygon this creates a new vertex - and they can therefore be made as complex as you wish
  • to delete any point (or vertex on a Line or Polygon) then click on Move, and double-click on the point
  • if you wish to enter, or change, the properties (fields) of any points, or to change the type of geometry (point, line, polygon) of any of the features, then click on Alter and fill in the form - remembering to Save the form before you Close it
  • when you have finished with this MFL click on the Close button, and all the extra buttons will disappear
  • to look at, add to, or modify your MFL simply click on the MFL tab and select your saved MFL from the dropdown - and then continue as above, making sure you save the MFL when you have down any changes
When you are happy with the details of your features (particularly their "geometry" ie where they are and their shapes) discuss with Peter what to do with it.

 

mapping4ops.org is a Society for One-Place Studies project supported by Grassroots Giving from Skipton Building Society
Glossary | BBCodes | Feedback